new potential user

Questions and answers about the best way to get started with Prism including: est hardware to use, software settings, etc..
Post Reply
ansollee
Posts: 1
Joined: Tue Sep 19, 2017 2:18 pm

new potential user

Post by ansollee » Tue Sep 19, 2017 2:25 pm

I have a new PD10 dome with DDW dome control software. Will Prism function with this dome control?
thank you, neyle

Hamza Touhami
Site Admin
Posts: 74
Joined: Sat May 20, 2017 6:05 pm
Location: Phoenix,AZ
Contact:

Re: new potential user

Post by Hamza Touhami » Tue Sep 19, 2017 4:21 pm

Hello and welcome to the forum

From visiting the DDW dome manufactorer's website (https://www.homedome.com/downloads.htm) I see that they offer an ASCOM driver for the dome controller. So yes, Prism can drive your dome and any equipment in it that has as ASCOM driver (most do these days) or is supported directly by Prism like Optec focusers, ZWO cameras, etc..

Please let me know if you have any questions.

Thanks
Hamza Touhami | Site Administrator
Hyperion-Astronomy.com

Image

Post Reply