[RESOLVED]Automatic Focus

[edstuckey]

After selecting a star for the Automatic Focus procedure. The window where you enter starting step point, midpoint end point, step size and iterations. The tutorial videos show 2 buttons, optimize step and optimize gap which is supposed to populate the fields based on the current focus reference.
Those 2 buttons do not show up on my automatic focus window. Where can I find them. Using a laptop running Windows 10.
I thought it might be a display problem, ran simulation mode in prism on my desktop computer and optimum step and optimum gap do not show up.
Appreciate any help, clear night tonight.

[edstuckey]

Update, the automatic video show what I am seeing. It in the blog on automatic focus that Hamza discusses optimum gap and step.

[rottielover]

What focuser are you using? I have a moonlight 2.5" and I don't get those buttons either.

My procedure has been to get "close" using a Bahtinov mask, then kick-off the automatic focus routine, let it run, and voila.

[Hamza Touhami]

if you have checked the box highlighted in the attached image, those bottons will not appear. If you uncheck that box, those buttons will come back as per the tutorial

[edstuckey]

After speaking with Hamza, I finally know how focusing works in Prism.