Guiding log files

Hardware and software setups, autoguiding and plate solving parameters, etc..
Post Reply
Posts: 1
Joined: Mon Aug 06, 2018 3:16 pm

Sat Sep 15, 2018 8:43 pm

Is there a checkbox to enable or disable guide log files?

I found one for guide images, but nothing regarding RMS guide numbers generated while guiding. I'd like to be able to look at the results compared to PHD2.

Thank you.

Cyril Cavadore
Site Admin
Posts: 74
Joined: Sat May 20, 2017 6:15 pm

Thu Sep 20, 2018 11:40 am

In the Prism's general setup.
In the log tab.
Cyril Cavadore
Principal Prism Author,
Post Reply