I noticed a few of us are using ASI cameras. Can you use the camera tab settings in Prism to set an ASI to Lowest Read Noise or High Dynamic Range (LRN or HDR) or does this have to be done in the ASI ASCOM Camera Interface?
CCD cameras (CMOS/CCD), DSLRs, telescope mounts, focusers, autoguiders, domes, Roll off roofs, etc..
2 posts • Page 1 of 1
You can set them in the camera tab if you know what they are. Just telling the camera to go to "unity gain" remains a function of the ASCOM driver
Hamza Touhami | Site Administrator