CCD Camera Readout Speed

CCD cameras (CMOS/CCD), DSLRs, telescope mounts, focusers, autoguiders, domes, Roll off roofs, etc..
Post Reply
User avatar
Observatory Grömme
Posts: 34
Joined: Sat Jan 19, 2019 9:38 am

Wed Feb 20, 2019 10:05 pm

Dear,

Is it possible to select the read out speed of the camera in Prism? I have a FLI Microline with 2 user selectable readout speeds: 6000kp/s and 1000kp/s.
I see on the info tab that the speed now is 6000kp/s. Where can i adjust this to 1000kp/s?

Thank you.
RUT_screenshot_2019-02-21_06-03-12.png
Cyril Cavadore
Site Admin
Posts: 74
Joined: Sat May 20, 2017 6:15 pm

Thu Feb 21, 2019 10:09 pm

Please check camera setup, and the option is there.
Cyril Cavadore
Principal Prism Author,
Alcor-System
www.alcor-system.com
User avatar
Observatory Grömme
Posts: 34
Joined: Sat Jan 19, 2019 9:38 am

Fri Feb 22, 2019 7:57 am

Dear,

Oh, should have looked at that first.
Okey, but again, same problem like the filterwheel. :

When setup: unboxing fast readout speed, clicking okey, starting camera, still fast readout speed 6000kp/s.
when disconnecting camera window, opening again setup, box : fast readout speed is checked...

So it keeps rechecking when closing the setup window...

Could you confirlm this?
Post Reply