Using SkySafari Pro through PRISM

CCD cameras (CMOS/CCD), DSLRs, telescope mounts, focusers, autoguiders, domes, Roll off roofs, etc..
Post Reply
umasscrew39
Posts: 10
Joined: Thu Mar 14, 2019 2:30 am

Sun Apr 14, 2019 2:39 pm

Is it possible to control the telescope slewing to objects using SkySafari Pro setup through PRISM?
Hamza Touhami
Site Admin
Posts: 564
Joined: Sat May 20, 2017 6:05 pm
Location: Phoenix,AZ
Contact:

Tue Apr 16, 2019 8:23 am

I am not sure I understand how you want to do this? if you're connected to the mount using a cable or wifi, you can just slew it from there just like if you were slewing the mount from PRISM itself. If I missed the point, please enlighten me
Hamza Touhami | Site Administrator
Hyperion-Astronomy.com
umasscrew39
Posts: 10
Joined: Thu Mar 14, 2019 2:30 am

Sat Apr 20, 2019 2:51 am

It is just a very simple way to find and slew to objects quickly. I know you can connect SkySafari Pro through SGP was I was just curious if you can do it with PRISM. That is all it is.
Hamza Touhami
Site Admin
Posts: 564
Joined: Sat May 20, 2017 6:05 pm
Location: Phoenix,AZ
Contact:

Sat Apr 20, 2019 8:35 pm

come on, give us a chance here :D you have one of THE best skycharts in the industry in PRISM already
Hamza Touhami | Site Administrator
Hyperion-Astronomy.com
Post Reply