I was using PHD2 for guiding since long. I had doubt if PRiSM v10 can do better sub pixel guiding with 50 mm guide scope (I modified 9x50 finder scope to a guide scope with help of 48mm adapter). Earlier, I preferred 80 mm short tube refractor for guiding but it was increasing mount load...
I just changed guiding parameter into PRiSM v10 and results are with you.. . I targeted ngc7790..
Attaching images for guide panel & ngc 7790..
Use this section to showcase your successes using Prism
3 posts • Page 1 of 1