Camera Tab gain and bias

CCD cameras (CMOS/CCD), DSLRs, telescope mounts, focusers, autoguiders, domes, Roll off roofs, etc..
Post Reply
Posts: 24
Joined: Tue Nov 14, 2017 8:06 am

Sat Jul 07, 2018 8:12 pm

I noticed a few of us are using ASI cameras. Can you use the camera tab settings in Prism to set an ASI to Lowest Read Noise or High Dynamic Range (LRN or HDR) or does this have to be done in the ASI ASCOM Camera Interface?

Hamza Touhami
Site Admin
Posts: 298
Joined: Sat May 20, 2017 6:05 pm
Location: Phoenix,AZ

Wed Jul 18, 2018 5:45 pm

You can set them in the camera tab if you know what they are. Just telling the camera to go to "unity gain" remains a function of the ASCOM driver
Hamza Touhami | Site Administrator

Post Reply