SBIG Initialization...
Driver object created...
Driver version : Version 4.37 - April 16, 2004
USB 0 required
No Filter wheel
Try to establish link...
DriverNTCCD SBIG (D6 PRISM) v1.01.01 Modified = 25 July 2004
Driver Infos : version=4.40  Name=SBIGUDrv.DLL Ver 4.40 Build 2, Max allowable Camera connected=2
Device open successfull !
Establish link successfull !
Imaging CCD : Firmware=2.40
CameraType=12
Name=SBIG ST-10 Dual CCD Camera
# ReadoutModes=10
ReadoutModes #1
Command Mode = 0
Width  = 2184
Height = 1472
Pixel_width (µm) = 6.80
Pixel_height (µm)= 6.80
gain (e-/ADU) = 1.33
Binning X =  1
Binning Y =  1
ReadoutModes #2
Command Mode = 1
Width  = 1092
Height = 736
Pixel_width (µm) = 13.60
Pixel_height (µm)= 13.60
gain (e-/ADU) = 1.33
Binning X =  2
Binning Y =  2
ReadoutModes #3
Command Mode = 2
Width  = 728
Height = 490
Pixel_width (µm) = 20.40
Pixel_height (µm)= 20.40
gain (e-/ADU) = 1.33
Binning X =  3
Binning Y =  3
ReadoutModes #4
Command Mode = 3
Width  = 2184
Height = 0
Pixel_width (µm) = 6.80
Pixel_height (µm)= 6.80
gain (e-/ADU) = 1.33
Binning X =  1
Binning Y =  1
ReadoutModes #5
Command Mode = 4
Width  = 1092
Height = 0
Pixel_width (µm) = 13.60
Pixel_height (µm)= 6.80
gain (e-/ADU) = 1.33
Binning X =  2
Binning Y =  1
ReadoutModes #6
Command Mode = 5
Width  = 728
Height = 0
Pixel_width (µm) = 20.40
Pixel_height (µm)= 6.80
gain (e-/ADU) = 1.33
Binning X =  3
Binning Y =  1
ReadoutModes #7
Command Mode = 6
Width  = 2184
Height = 1472
Pixel_width (µm) = 6.80
Pixel_height (µm)= 6.80
gain (e-/ADU) = 1.33
Binning X =  1
Binning Y =  1
ReadoutModes #8
Command Mode = 7
Width  = 1092
Height = 736
Pixel_width (µm) = 13.60
Pixel_height (µm)= 13.60
gain (e-/ADU) = 1.33
Binning X =  2
Binning Y =  2
ReadoutModes #9
Command Mode = 8
Width  = 728
Height = 490
Pixel_width (µm) = 20.40
Pixel_height (µm)= 20.40
gain (e-/ADU) = 1.33
Binning X =  3
Binning Y =  3
ReadoutModes #10
Command Mode = 9
Width  = 242
Height = 163
Pixel_width (µm) = 61.20
Pixel_height (µm)= 61.20
gain (e-/ADU) = 1.33
Binning X =  9
Binning Y =  9
Full Frame device
Shutter required
 
Guiding CCD : Firmware=2.40
CameraType=12
Name=SBIG ST-10 Dual CCD Camera
# ReadoutModes=3
ReadoutModes #1
Command Mode = 0
Width  = 657
Height = 495
Pixel_width (µm)= 7.40
Pixel_height (µm)= 7.40
gain (e-/ADU) = 0.45
Binning X =  1
Binning Y =  1
ReadoutModes #2
Command Mode = 1
Width  = 328
Height = 247
Pixel_width (µm)= 14.80
Pixel_height (µm)= 14.80
gain (e-/ADU) = 0.45
Binning X =  2
Binning Y =  2
ReadoutModes #3
Command Mode = 2
Width  = 219
Height = 165
Pixel_width (µm)= 22.20
Pixel_height (µm)= 22.20
gain (e-/ADU) = 0.45
Binning X =  3
Binning Y =  3
Frame transfer device
Shutter required
SBIG Camera Initialization went successfully...
Assign Guider engine to SBIG Camera